Newmont Mining Corporation Mining Jobs in Brong Ahafo Region
1. Patiently scroll down and read the job description below.
2. Scroll down and find how to apply or mode of application for this job after the job description.
3. Carefully follow the instructions on how to apply.
4. Always apply for a job by attaching CV with a Cover Letter / Application Letter.
About This Role
- To support the butt welding of poly (HDPE) pipes, using a variety of techniques, and connecting in-pit sumps to designated ponds in a safe and controlled manner.
In This Role You Will
Pump Operations Planning and Execution
- Communicate with and receive instruction from the Dewatering Supervisor before the execution of activities, to determine where water will be pumped to, and to ensure that the system remains open.
- Conduct inspections on the following aspects, before carrying out work:
- pipelines and valves for leakages.
- fuel level of the pump.
- sumps.
- boreholes around the pit.
- Install pumps in a stage/phase approach and connect pipelines to pumps.
- Complete prestart inspection of pumps and the poly welding machine.
- Report any identified defects to the Dewatering supervisor.
- Take flow readings from boreholes and report any detected issues to the Dewatering Supervisor.
- Request for flow rate feedback from the process plant/water treatment plant.
- Disconnect all pumps for blasting activities.
- Check pressure gauges, RPM’s, vacuum gauges and load factors, and record these on the key performance indicator (KPI) sheet.
- Obtain and take flow meter readings at the start and the end of the shift.
- Ensue that pumps are inspected and ready to supply water for water bowers for dust suppression purposes.
- Conduct the installation of standpipes.
- Ensure safe slipping of pipe along the pit high walls.
- Monitor the operation of the pumps to ensure that the water in the sump(s) are pumped from the pit to the designated pond.
ADVERTISEMENT - CONTINUE READING BELOW
Poly welding Operations Planning and Execution
- Understand the type, size and fitting required for the welding of poly pipes.
- Adhere within the parameters of the job.
- Clean and prepare plastic surfaces for welding, cutting, gouging, beveling or filing.
- Shape and bend plastic piping by using hand tools, machines or techniques such as heating.
- Measure and align pipes for joining using hand tools and measuring equipment.
- Fuse HDPE sections using various welding, precision and bolting techniques.
- Clean, file and polish finished welding product.
- Conduct the construction, installation and laying of pipelines in the pit and the flipping of pipelines over high walls.
- Maintain QA / QC standards during pipe welding / fusion activities.
- Fit attachments, connect hoses between the pit and the pond.
- Carry out welding activities using fusion machine.
General Execution
- Plan and prioritise own activities daily.
- Read, interpret and follow drawings and blueprints for direction on every pump and polywelding activity.
- Obtain the necessary equipment and consumables required to execute tasks from the Supervisor.
- Ensure that all works-in-progress and activities meet specifications, codes and regulations.
- Contribute to the achievement of mine water treatment and dewatering production targets.
- Participate in regular tool and safety audits.
- Participate in further training for upskilling purposes.
- Provide verbal feedback to the Supervisor on the activities completed for the day.
Stakeholder Management and Engagement
- Liaise with the Load and Haul Supervisor to obtain necessary equipment required for pump installations.
- Liaise with the Hydrotechnical team and submit completed KPI sheets to them.
- Liaise with the blast crew in understanding blast times to make safety pre-preparations with regards to pumps and piping.
- Ensure own dewatering and water treatment shift work meets established statutory standards.
Health and Safety Management
- Inspect work areas and ensure all areas comply with internal Newmont and external regulatory standards.
- Adhere strictly to internal Newmont water management and dewatering standards.
- Comply with safe dewatering procedures.
- Maintain a strong focus of safety throughout all activities.
- Provide hands-on assistance during operations activities to fellow colleagues to ensure that safe work practices are followed.
- Attend daily morning safety meetings.
Your Training, Skills & Experience Checklist
Formal Qualification (including Professional Registrations):
- Senior High School Certificate.
ADVERTISEMENT - CONTINUE READING BELOW
Additional Knowledge
- MINCOM Equipment Competency.
- Driver’s License E.
- General knowledge in mid-to-heavy equipment operation.
- Ability to interpret fusion parameters.
Experience
- Minimum of 2 – 3 years’ working experience in a polywelding / pump environment within a large open pit mine.
Technical Skills
- Strong listening skills.
- Strong concentration skills.
- Sound planning, organising and prioritising skills.
- Sound analytical and problem-solving skills.
- Sound technical communication (written and verbal) and interpersonal skills.
- Sound information monitoring skills.
- Ability to understand pumping specifications, pumping curves, flow rates and water pressure.
- Ability to read and follow blueprints, graphs, charts and plans.
- Ability to build and maintain positive relationships with peers and supervisor.
1. Patiently scroll down and read the job description below.
2. Scroll down and find how to apply or mode of application for this job after the job description.
3. Carefully follow the instructions on how to apply.
4. Always apply for a job by attaching CV with a Cover Letter / Application Letter.
About This Role
- To support the butt welding of poly (HDPE) pipes, using a variety of techniques, and connecting in-pit sumps to designated ponds in a safe and controlled manner.
In This Role You Will
Pump Operations Planning and Execution
- Communicate with and receive instruction from the Dewatering Supervisor before the execution of activities, to determine where water will be pumped to, and to ensure that the system remains open.
- Conduct inspections on the following aspects, before carrying out work:
- pipelines and valves for leakages.
- fuel level of the pump.
- sumps.
- boreholes around the pit.
- Install pumps in a stage/phase approach and connect pipelines to pumps.
- Complete prestart inspection of pumps and the poly welding machine.
- Report any identified defects to the Dewatering supervisor.
- Take flow readings from boreholes and report any detected issues to the Dewatering Supervisor.
- Request for flow rate feedback from the process plant/water treatment plant.
- Disconnect all pumps for blasting activities.
- Check pressure gauges, RPM’s, vacuum gauges and load factors, and record these on the key performance indicator (KPI) sheet.
- Obtain and take flow meter readings at the start and the end of the shift.
- Ensue that pumps are inspected and ready to supply water for water bowers for dust suppression purposes.
- Conduct the installation of standpipes.
- Ensure safe slipping of pipe along the pit high walls.
- Monitor the operation of the pumps to ensure that the water in the sump(s) are pumped from the pit to the designated pond.
ADVERTISEMENT - CONTINUE READING BELOW
Poly welding Operations Planning and Execution
- Understand the type, size and fitting required for the welding of poly pipes.
- Adhere within the parameters of the job.
- Clean and prepare plastic surfaces for welding, cutting, gouging, beveling or filing.
- Shape and bend plastic piping by using hand tools, machines or techniques such as heating.
- Measure and align pipes for joining using hand tools and measuring equipment.
- Fuse HDPE sections using various welding, precision and bolting techniques.
- Clean, file and polish finished welding product.
- Conduct the construction, installation and laying of pipelines in the pit and the flipping of pipelines over high walls.
- Maintain QA / QC standards during pipe welding / fusion activities.
- Fit attachments, connect hoses between the pit and the pond.
- Carry out welding activities using fusion machine.
General Execution
- Plan and prioritise own activities daily.
- Read, interpret and follow drawings and blueprints for direction on every pump and polywelding activity.
- Obtain the necessary equipment and consumables required to execute tasks from the Supervisor.
- Ensure that all works-in-progress and activities meet specifications, codes and regulations.
- Contribute to the achievement of mine water treatment and dewatering production targets.
- Participate in regular tool and safety audits.
- Participate in further training for upskilling purposes.
- Provide verbal feedback to the Supervisor on the activities completed for the day.
Stakeholder Management and Engagement
- Liaise with the Load and Haul Supervisor to obtain necessary equipment required for pump installations.
- Liaise with the Hydrotechnical team and submit completed KPI sheets to them.
- Liaise with the blast crew in understanding blast times to make safety pre-preparations with regards to pumps and piping.
- Ensure own dewatering and water treatment shift work meets established statutory standards.
Health and Safety Management
- Inspect work areas and ensure all areas comply with internal Newmont and external regulatory standards.
- Adhere strictly to internal Newmont water management and dewatering standards.
- Comply with safe dewatering procedures.
- Maintain a strong focus of safety throughout all activities.
- Provide hands-on assistance during operations activities to fellow colleagues to ensure that safe work practices are followed.
- Attend daily morning safety meetings.
Your Training, Skills & Experience Checklist
Formal Qualification (including Professional Registrations):
- Senior High School Certificate.
ADVERTISEMENT - CONTINUE READING BELOW
Additional Knowledge
- MINCOM Equipment Competency.
- Driver’s License E.
- General knowledge in mid-to-heavy equipment operation.
- Ability to interpret fusion parameters.
Experience
- Minimum of 2 – 3 years’ working experience in a polywelding / pump environment within a large open pit mine.
Technical Skills
- Strong listening skills.
- Strong concentration skills.
- Sound planning, organising and prioritising skills.
- Sound analytical and problem-solving skills.
- Sound technical communication (written and verbal) and interpersonal skills.
- Sound information monitoring skills.
- Ability to understand pumping specifications, pumping curves, flow rates and water pressure.
- Ability to read and follow blueprints, graphs, charts and plans.
- Ability to build and maintain positive relationships with peers and supervisor.
ADVERTISEMENT - CONTINUE BELOW TO APPLY