Wood Quality Control/Assurance Jobs in Ghana
1. Patiently scroll down and read the job description below.
2. Scroll down and find how to apply or mode of application for this job after the job description.
3. Carefully follow the instructions on how to apply.
4. Always apply for a job by attaching CV with a Cover Letter / Application Letter.
Wood is currently recruiting for a QC Inspector Level 2 on a short term contract in Ghana.
Key Responsibilities
- Develop / implement the Quality Policy and the associated Quality Assurance system, in order to ensure that contractors comply with WORK’s specifications
- Develop/review quality control standards and project specific written procedures for quality control/quality assurance during the construction phase based on the applicable COMPANY specifications
- Provide QA supports as necessary and educate Sub-contractors / suppliers on Company Quality standards and requirements
- Diagnosis of quality problems
- Assist in the resolution of quality related problems
- Support engineering, during engineering deliverables development, and safety departements
- Collect and feed the lesson learnt cycle
- Maintain surveillance of welding and fitting practices for conformance to WPS, Code, and client specific requirements (i.e. preheat, tacking, electrode storage, weld parameters)
- Check the conformity of construction activities with approved Quality Control Plan and obtain the relevant documentation
- Check the preparation of foundations and the correct preparation of reinforcements, element mixes
- Monitor concrete preparation, pouring and correct curing operations
- Check the sampling operations (when required)
- Check materials quality by witnessing or reviewing laboratory examination results, sub-grade dry density, moisture content, compression strength test etc.
- Orderly collect, check and manage documents certifying tests, controls and inspections carried out witnessing the tests, controls and inspections carried out
- Receive and review all NDT reports for completeness and accuracy of code and client required information and correct identification of welds per location and line #
- Provide field surveillance of subcontractor activities such as NDE, boring, spray, insulation, Hydro-torque, etc.
- Supervise / participate in the production of mark-up of as built drawings with welder, NDE, and MTR information
- Assist in the production of hydro test packages, torque joint packages, and final redline drawings for permanent record and client turnover
- Provide inspection of assemblies prior to hydro testing to ensure all MTRs, NDE, and visual inspections are complete and issue punch list / test clearance forms prior to hydrotest
- Witness hydro tests to ensure all required test and calibration documentation are available and relevant and that the test procedures conform
Skills / Qualifications
- Technical Diploma (Engineering degree preferred)
- NDE Level 2 Certified
- 10 Years of Oil & Gas experience
- 5 Years of quality assurance and control experience
- ISO 9000 Series and Quality & Safety general knowledge
- Guidelines & Procedures Definitions, Law Compliance Analysis & Assessment, Due Diligence & Permitting, Technical Specs & Standards Definitions, Information & Training, Contractors Specs, Qualification & Auditing
- Knowledge – able in quality control testing and inspection
- Implement Quality Control program for Oil & Gas on-shore and off – shore construction projects
- Ability to work with and communicate effectively with subcontractors, superintendents, engineering staff, consultants and owner’s representatives
- Ability to coordinate inspection and testing activities with subcontractors
- Ability to record and organize all necessary documentation to maintain traceability of the implementation, maintenance and effectiveness of the Quality Control Program
- Ability to speak clearly and exercise good judgment
- Ability to work during nights
- Ability to use MS office to provide written reports and maintenance of QC records
Company Overview
Wood is a global leader in the delivery of project, engineering and technical services to energy and industrial markets. We operate in more than 60 countries, employing around 60,000 people, with revenues of over $10 billion. We provide performance-driven solutions throughout the asset life cycle, from concept to decommissioning across a broad range of industrial markets, including the upstream, midstream and downstream oil & gas, power & process, environment and infrastructure, clean energy, mining, nuclear, and general industrial sectors. www.woodplc.com
Diversity Statement
We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.
1. Patiently scroll down and read the job description below.
2. Scroll down and find how to apply or mode of application for this job after the job description.
3. Carefully follow the instructions on how to apply.
4. Always apply for a job by attaching CV with a Cover Letter / Application Letter.
Wood is currently recruiting for a QC Inspector Level 2 on a short term contract in Ghana.
Key Responsibilities
- Develop / implement the Quality Policy and the associated Quality Assurance system, in order to ensure that contractors comply with WORK’s specifications
- Develop/review quality control standards and project specific written procedures for quality control/quality assurance during the construction phase based on the applicable COMPANY specifications
- Provide QA supports as necessary and educate Sub-contractors / suppliers on Company Quality standards and requirements
- Diagnosis of quality problems
- Assist in the resolution of quality related problems
- Support engineering, during engineering deliverables development, and safety departements
- Collect and feed the lesson learnt cycle
- Maintain surveillance of welding and fitting practices for conformance to WPS, Code, and client specific requirements (i.e. preheat, tacking, electrode storage, weld parameters)
- Check the conformity of construction activities with approved Quality Control Plan and obtain the relevant documentation
- Check the preparation of foundations and the correct preparation of reinforcements, element mixes
- Monitor concrete preparation, pouring and correct curing operations
- Check the sampling operations (when required)
- Check materials quality by witnessing or reviewing laboratory examination results, sub-grade dry density, moisture content, compression strength test etc.
- Orderly collect, check and manage documents certifying tests, controls and inspections carried out witnessing the tests, controls and inspections carried out
- Receive and review all NDT reports for completeness and accuracy of code and client required information and correct identification of welds per location and line #
- Provide field surveillance of subcontractor activities such as NDE, boring, spray, insulation, Hydro-torque, etc.
- Supervise / participate in the production of mark-up of as built drawings with welder, NDE, and MTR information
- Assist in the production of hydro test packages, torque joint packages, and final redline drawings for permanent record and client turnover
- Provide inspection of assemblies prior to hydro testing to ensure all MTRs, NDE, and visual inspections are complete and issue punch list / test clearance forms prior to hydrotest
- Witness hydro tests to ensure all required test and calibration documentation are available and relevant and that the test procedures conform
Skills / Qualifications
- Technical Diploma (Engineering degree preferred)
- NDE Level 2 Certified
- 10 Years of Oil & Gas experience
- 5 Years of quality assurance and control experience
- ISO 9000 Series and Quality & Safety general knowledge
- Guidelines & Procedures Definitions, Law Compliance Analysis & Assessment, Due Diligence & Permitting, Technical Specs & Standards Definitions, Information & Training, Contractors Specs, Qualification & Auditing
- Knowledge – able in quality control testing and inspection
- Implement Quality Control program for Oil & Gas on-shore and off – shore construction projects
- Ability to work with and communicate effectively with subcontractors, superintendents, engineering staff, consultants and owner’s representatives
- Ability to coordinate inspection and testing activities with subcontractors
- Ability to record and organize all necessary documentation to maintain traceability of the implementation, maintenance and effectiveness of the Quality Control Program
- Ability to speak clearly and exercise good judgment
- Ability to work during nights
- Ability to use MS office to provide written reports and maintenance of QC records
Company Overview
Wood is a global leader in the delivery of project, engineering and technical services to energy and industrial markets. We operate in more than 60 countries, employing around 60,000 people, with revenues of over $10 billion. We provide performance-driven solutions throughout the asset life cycle, from concept to decommissioning across a broad range of industrial markets, including the upstream, midstream and downstream oil & gas, power & process, environment and infrastructure, clean energy, mining, nuclear, and general industrial sectors. www.woodplc.com
Diversity Statement
We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.
ADVERTISEMENT - APPLY BUTTON BELOW ↓