AngloGold Ashanti Engineering Jobs in Obuasi
1. Patiently scroll down and read the job description below.
2. Scroll down and find how to apply or mode of application for this job after the job description.
3. Carefully follow the instructions on how to apply.
4. Always apply for a job by attaching CV with a Cover Letter / Application Letter.
The Mechanical Technician-Shaft Maintenance reports to the Shaft Maintenance Supervisor and is accountable for general mechanical maintenance and repair of mine and Shaft Infrastructure, (per statutory inspection, ore transport equipment and materials movers in a safe and compliant manner (primarily with LI2182) as instructed during refurbishment and maintenance, of the Shaft Infrastructure.
The work is to be executed by detailed tasking with applicable Government of Ghana and AGAG safety and environmental requirements.
KEY ACCOUNTABILITIES:
- Assess risks for all tasks and ensure they are controlled before and during task execution.
- Report all incidents and ensure they have been investigated and corrective actions completed on time.
- Act on all corrective actions assigned to you or under your jurisdiction and ensure timely completion.
ADVERTISEMENT - CONTINUE READING BELOW ↓
- Execute statutory Inspections of Shafts, Transporting and Slinging of Materials and all Other shaft related Jobs in accordance with and ensuring compliance with LI2182.
- Identify actions for continuous improvement and that compliant operability to requirements is ensured.
- Organize and report information for the Shaft Supervisor to allow development of condition monitoring routes and checks for infrastructure equipment.
- Execute designated and tasked daily work checks on a routine scheduled basis.
- Report any anomalies to Shaft Supervisor for the generation of work requests in SAP as required for maintenance planning and scheduling.
- Carry out daily pre-start and/or shift handover checks and complete check sheets as required according to the established schedules and also per plant requirements.
- Execute daily pre-start checks of equipment/tools prior to leaving workshop. Escalate and report any anomalies.
- Assess all equipment required for completion of the tasked work, create checklist and transport all tools necessary for task completion.
- Complete shift short interval control sheets as required.
- Monitor operating parameters in accordance with standards provided and take corrective action as indicated or required.
- Identify, communicate, and escalate potential cost reduction initiatives to the Supervisor.
- Execute work in a timely manner; escalate real or potential delays to the Supervisor.
- Log monitored equipment performance for entry in asset health system and take proactive measures to register and escalate symptoms of potential failure to Shaft Maintenance Supervisor
- Stop equipment from working if there exists a high risk or unsafe to be used and report to Shaft Supervisor
QUALIFICATION, EXPERIENCE AND TECHNICAL COMPETENCIES
Qualification
- A minimum of Technician Part II Certificate or equivalent
- Associate degree or technical diploma in Engineering Technology or related field
- City and Guilds certificate part II.
ADVERTISEMENT - CONTINUE READING BELOW ↓
Experience
- An experienced mechanical tradesperson with a minimum of three (3) years’ experience in underground mining
Technical Competencies
- Fully literate and numerate
- Strong mechanical maintenance competencies in an underground mining environment
- Must be able to communicate about technical issues both orally and in writing
- Excellent knowledge of the requirements of LI2182
1. Patiently scroll down and read the job description below.
2. Scroll down and find how to apply or mode of application for this job after the job description.
3. Carefully follow the instructions on how to apply.
4. Always apply for a job by attaching CV with a Cover Letter / Application Letter.
The Mechanical Technician-Shaft Maintenance reports to the Shaft Maintenance Supervisor and is accountable for general mechanical maintenance and repair of mine and Shaft Infrastructure, (per statutory inspection, ore transport equipment and materials movers in a safe and compliant manner (primarily with LI2182) as instructed during refurbishment and maintenance, of the Shaft Infrastructure.
The work is to be executed by detailed tasking with applicable Government of Ghana and AGAG safety and environmental requirements.
KEY ACCOUNTABILITIES:
- Assess risks for all tasks and ensure they are controlled before and during task execution.
- Report all incidents and ensure they have been investigated and corrective actions completed on time.
- Act on all corrective actions assigned to you or under your jurisdiction and ensure timely completion.
ADVERTISEMENT - CONTINUE READING BELOW ↓
- Execute statutory Inspections of Shafts, Transporting and Slinging of Materials and all Other shaft related Jobs in accordance with and ensuring compliance with LI2182.
- Identify actions for continuous improvement and that compliant operability to requirements is ensured.
- Organize and report information for the Shaft Supervisor to allow development of condition monitoring routes and checks for infrastructure equipment.
- Execute designated and tasked daily work checks on a routine scheduled basis.
- Report any anomalies to Shaft Supervisor for the generation of work requests in SAP as required for maintenance planning and scheduling.
- Carry out daily pre-start and/or shift handover checks and complete check sheets as required according to the established schedules and also per plant requirements.
- Execute daily pre-start checks of equipment/tools prior to leaving workshop. Escalate and report any anomalies.
- Assess all equipment required for completion of the tasked work, create checklist and transport all tools necessary for task completion.
- Complete shift short interval control sheets as required.
- Monitor operating parameters in accordance with standards provided and take corrective action as indicated or required.
- Identify, communicate, and escalate potential cost reduction initiatives to the Supervisor.
- Execute work in a timely manner; escalate real or potential delays to the Supervisor.
- Log monitored equipment performance for entry in asset health system and take proactive measures to register and escalate symptoms of potential failure to Shaft Maintenance Supervisor
- Stop equipment from working if there exists a high risk or unsafe to be used and report to Shaft Supervisor
QUALIFICATION, EXPERIENCE AND TECHNICAL COMPETENCIES
Qualification
- A minimum of Technician Part II Certificate or equivalent
- Associate degree or technical diploma in Engineering Technology or related field
- City and Guilds certificate part II.
ADVERTISEMENT - CONTINUE READING BELOW ↓
Experience
- An experienced mechanical tradesperson with a minimum of three (3) years’ experience in underground mining
Technical Competencies
- Fully literate and numerate
- Strong mechanical maintenance competencies in an underground mining environment
- Must be able to communicate about technical issues both orally and in writing
- Excellent knowledge of the requirements of LI2182
ADVERTISEMENT - APPLY BUTTON BELOW ↓